UniCarriers 1F1 Operator's Manual page 136

!
WARNING
• Do not use the shift function to push or pull loads or pallets.
If you use the side shift to pull or push loads, the equipment can be
overstrained, resulting in a malfunction. In addition, there are risks of
damaging loads or injuring people. Never push or pull loads with the
side shift.
!
WARNING
• Do not shift when the forks are in contact with the floor or on
a table.
If you do so, it can result in a malfunction of the equipment or a load
collapse. Do not shift when the forks are in contact with the ground.
!
• Do not travel with unstable or unsecured loads.
Do not travel with loads shifted to one side.
When loads are shifted (off centered) they will be less stable. This could
cause the load to shift or fall off the lift truck.
It also could cause the lift truck to become unstable and tip over.
134
WARNING