Main Terms Used In This Section; Safety Rules And Practices - UniCarriers 1F1 Operator's Manual

Shift to right.

MAIN TERMS USED IN THIS SECTION

Shift: To move the forks or load to the right or the left.
Side Shift Stroke: The maximum distance the forks or load can travel
to the right or the left.
Shift Finger Bar: An oblong board on which the forks and the
backrest are mounted. This shift finger bar shifts (moves) to the right
and left.
Attachment: Equipment or parts to be added or replaced with
the loading/unloading devices to perform a variety of loading and
unloading.
Shift to left.

SAFETY RULES AND PRACTICES

!
• Do not make sudden and quick shifts with the forks loaded
or raised.
If you make sudden shifts with the forks loaded, there is a risk of a load
collapse. This can cause the lift truck to become unstable and possibly
tip over.
!
• Only operate the side shift when entering or placing a load to
correct position before lowering.
• Never operate side shift during travel.
• Never operate side shift during lifting or lowering.
133
WARNING
WARNING