UniCarriers 1F1 Operator's Manual page 83

Hide thumbs Also See for 1F1:
Table of Contents

Advertisement

!
WARNING
• Periodically check to see that the seat belt and metal
components, such as buckles, tongues, retractors,
flexible wires and anchors, work properly. If loose parts,
deterioration, cuts or other damage is found, the entire seat
belt assembly should be replaced.
• Tightly wrap the seat belt around the hipbone as low as
possible. If the seat belt comes off the hipbone and it wraps
around the abdomen, it may cause an injury because strong
pressure is applied onto the abdomen.
• Do not fasten the seat belt if it is twisted. If it is twisted,
it may cause an injury because the twisted belt cannot
disperse on impact.
• Do not adjust the seat belt to be loose such as slackening
it intentionally by use of a clip. If the seat belt is fastened
loosely, it cannot perform correctly.
• Do not excessively tilt back the backrest, otherwise the seat
belt may not perform correctly.
• Do not put any foreign substance into the buckle or retractor,
otherwise its (performance cannot be demonstrated)
because it cannot be fastened normally.
• It is recommended that the seat belt be used by pregnant
women and injured persons, consult with you doctor for
specific recommendations beforehand because her/his
abdomen is pressed by the seat belt.
• A seat belt that was once impacted, damaged or broken in
part may not perform correctly. Replace it with a new one by
contacting your Local Authorized Dealer.
• For cleaning the seat belt, use a neutral detergent or
lukewarm water. After cleaning, dry it completely before
use. Be sure not to use an organic solvent such as benzine
or gasoline, otherwise the seat belt deteriorates in its
performance and may not function as designed.
81

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1f2

Table of Contents