Transporting Lift Truck; Approach Angle, Departure Angle And Gangway - UniCarriers 1F1 Operator's Manual

TRANSPORTING LIFT TRUCK

!
WARNING
1. Tilt the mast back to the maximum without load.
2. Check the approach and departure angles to make sure the
underside of the lift truck does not come into contact with the
load carrying platform or the ground.
3. When using a load bridge, make sure the planks are capable of
withstanding the deadweight of the lift truck.
4. When winching the lift truck onto a load carrying platform, be
sure to attach the cable to the traction bar (refer to page 27). Do
not ride on the lift truck while it is being winched.
5. Be sure to use lashing points and firmly secure the lift truck to
the load carrying platform.
6. When hoisting (lifting) up the lift truck, be sure to use the lifting
points (refer to page 26).
7. Apply the parking brake, turn off the ignition switch and remove
the key, if equipped.
8. Make sure the battery connector is disconnected.

APPROACH ANGLE, DEPARTURE ANGLE AND GANGWAY

Refer to "Grade Clearance" on Main Truck Specifications.
Approach angle
Departure angle
25
Ramp breakover angle
Gangway (Load Bridge)
Chock Gangway (Load Bridge)