Overview Of Side Shift - UniCarriers 1F1 Operator's Manual

1. Shift finger bar.
2. Side shift cylinder.
This section describes only the handling of loads using the side
shift option. Before using the side shift, be sure to read this section
thoroughly and understand it. For handling (safety, operations,
inspection) of the lift truck, refer to the applicable sections of this
manual.

OVERVIEW OF SIDE SHIFT

Since the shift finger bar (on which the forks and the backrest are
mounted) can be shifted to the right and left only by operating the
lever from the operator's seat, you can accurately insert the fork under
pallets or stack loads correctly at targeted positions.
The following is the standard amount of side shift.
Model Variation
1F1/1F2 series
132
Side Shift Distance
Each to right/left 100 mm (3.94 in)