Twin Control Lever Type; Single Control Lever Type - UniCarriers 1F1 Operator's Manual

Twin Control Lever Type

This method uses two levers: a lift lever for
moving the fork up and down and a tilt lever
for tilting the mast forward and backward:
• Lift lever:
Lift: Pull the lever to the operator side.
Lower: Push the lever forward.
• Tilt lever:
Forward: Push the lever forward.
Backward: Pull the lever to the operator
side.
!
WARNING
• Do not perform forward tilt while the lift truck is traveling. It
may cause loads to shift or drop and also may cause the lift
truck to become unstable and tip over.
• Do not perform forward tilt while lifting loads in any position.
It may cause loads to shift or drop and also may cause the
lift truck to become unstable and tip over.
Speed Control:
Control of lifting speed: The speed can be changed by controlling the
tilt angle of the lever and by how much the operator depresses the
accelerator pedal.
Control of lowering speed: The speed can be changed only by
controlling the tilt angle of the lever, do not depress the accelerator
pedal.
Control of forward and backward tilting speeds: For both forward and
backward tilts, the speed can be changed by controlling the tilt angle
of the lever and by how much the operator depresses the accelerator
pedal.

Single Control Lever Type

Lift lever Tilt lever
This method performs up and down
movements of fork and forward and
backward tilts of mast using a single lever:
• Lift:
Diagonally pull the lever to the left side
of operator.
• Lower:
Push the lever in the right forward
direction.
• Forward:
Push the lever in the left forward
direction.
• Backward:
Diagonally pull the lever to the right side of operator.
Simultaneous operations are also allowed by combining up and down
movements and forward and backward tilts.
This may be done by moving the lever into the a, b or c position.
• Backward tilt while lifting:
Pull the lever to the center of operator side.
• Backward tilt while lowering:
Turn over the lever to the right side of center.
• Forward tilt while lowering:
Push the lever in the center forward direction.
61
c
b
a