Operation Of The Control Lever For The Side Shift - UniCarriers 1F1 Operator's Manual

OPERATION OF THE CONTROL LEVER FOR THE SIDE SHIFT

A lift truck attached with a side shift has a control lever to operate the
side shift, in addition to the control levers for standard operations.
MANUAL HYDRAULIC CONTROL
FINGERTIP CONTROL
1 Lever Type 2 Lever Type
When the lever is pulled toward the
operator, the shift finger bar (with forks
mounted) shifts (moves) to the right.
When the lever is pushed forward, the
shift finger bar (with forks mounted)
shifts (moves) to the left.
!
• Do not move the levers suddenly and quickly. There is a risk
of a load collapse.
NOTE:
The shifting speed changes depending on the amount the lever is
moved forward or backward.
!
• When you operate your side shift, make sure to raise the
forks approximately 100 - 200 mm (3.94 - 7.87 in) from the
ground before operation. If you shift with the forks while they
are in contact with the ground, the side shift forks or load
could get caught and damage the lift truck or load.
135
CAUTION
WARNING