Operating Conditions - Carl Valentin DYNACODE Operating Manual

Dynacode series
Instructions for
lithium battery
Conditions for
installation place
10.15

2.2 Operating conditions

Before initial operation and during operation these operating
conditions have to be observed to guarantee save and interference-
free service of our devices.
Therefore please carefully read these operating conditions.
Shipment and storage of our devices are only allowed in original
packing.
Installation and initial operation of direct print module is only allowed if
operating conditions were fulfilled.
Commissioning is prohibited until it can be established that, where
relevant, the machine into which the partly completed machinery is to
be incorporated complies with the provisions of Machinery Directive
2006/42/EC.
Initial operation, programming, operation, cleaning and service of our
direct print modules are only recommended after careful study of our
manuals.
Operation of direct print module is only allowed by especially trained
persons.
Perform trainings regularly.
Content of the training are chapter 2.2 (Operating conditions),
chapter 5 (Loading ribbon cassette) and chapter 9 (Maintenance
and cleaning).
These indications are also valid for someone else's equipment
supplied by us.
Only use original spare and exchange parts.
Please contact the manufacturer with respect to spare/wear parts.
CPU of direct print module is equipped with a lithium battery (type CR
2032) for which the battery regulation is to apply. This regulation plans
that unloaded batteries have to be given to used battery collecting
containers of trade and public carries. In case that batteries were not
completely discharged you have to make arrangements for short-
circuits. At a shutdown of direct print module the battery has to be
disposed in either case separately from direct print module.
DANGER!
Danger of life by explosion!

Use nonconducting tools.
The installation place of direct print module should be even, free of
vibration and currents of air are to be avoided.
The direct print modules have to be installed to ensure optimal
operation and servicing.
Operating manual
Safety notes
13