Symbol
Touch screen console
Remote control sensor
Position System from Touch Screen Console
Follow this process to use the touch screen console to position the system.
1. Press [POSITIONING] on the screen, if necessary.
Figure 3-8 Touch Screen Console (showing Generator properties)
The Positioning screen appears (Figure 3-9)
Definium 5000 X-Ray System
Operator Manual
Displays current system position, allows selection of pre-programed
positions, and allows modification of the exam parameters.
Refer to
Position System from Touch Screen Console
Modify Positions
(p. 3-13) for more information.
Receives the signal from the remote control (optional).
Do not block or cover the sensor. The signals from the remote control
may not be received.
5197809-1EN
Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 3: System Overview
Description
(p. 3-11) and
3-11