Jtag Emulation Port - Analog Devices ADSP-BF537 EZ-KIT Lite Manual

System Architecture
Limits to the current and to the interface speed must be taken into consid-
eration when using the expansion interface. The maximum current limit is
dependent on the capabilities of the used regulator. Additional circuitry
also can add extra loading to signals, decreasing their maximum effective
speed.

Analog Devices does not support and is not responsible for the
effects of additional circuitry.

JTAG Emulation Port

The JTAG emulation port allows an emulator to access the processor's
internal and external memory through a 6-pin interface. The JTAG emu-
lation port of the processor connects also to the USB debugging interface.
When an emulator connects to the board at
interface is disabled. See
information about the connector.
To learn more about available emulators, go to:
http://www.analog.com/processors/tools/blackfin
2-8
"JTAG Connector (ZP4)" on page 2-24
ADSP-BF537 EZ-KIT Lite Evaluation System Manual
, the USB debugging
ZP4
.
for more