Connectors
DCE UART Connector (J2)
The pinout of the
Lite
Schematic.
Part Description
IDC header
IDC socket
Link Port /JTAG Connectors (J3 and P8)
The
and
connectors provide access to the Link Port and JTAG sig-
J3
P8
nals of the ADSP-BF609 processor.
connector is for link port 1.
Part Description
ERF8 10X2, RA female (J3)
ERm8 10x2, RA male (P8)
6" cable ERF8 to ERM8 10X2
JTAG Connector (P1)
The JTAG interface of the ADSP-BF609 processor is connected to the
14-pin 0.1" header,
mating connector must have a plug. For more information, see
Interface.
Remove the standalone debug agent when an emulator is used with the
board. Follow the installation instructions provided in
Installation, using
2-26
connector can be found in
J2
Manufacturer
FCI
Mating Connector
DIGI-KEY
J3
Manufacturer
SAMTEC
SAMTEC
Mating Cable
SAMTEC
. Pin 3 is missing to provide keying. Pin 3 in the
P1
as the JTAG connection point.
P1
ADSP-BF609 EZ-KIT Lite Evaluation System Manual
ADSP-BF609 EZ-KIT
Part Number
68737-410HLF
S4205-ND
supports link port 0 and the
Part Number
ERF8-010-01-S-D-RA-L
ERM8-010-01-S-D-RA-TR
ERCD-010-06.00-TBL-SBR-1
EZ-KIT Lite
P8
JTAG
Need help?
Do you have a question about the ADSP-BF609 EZ-KIT Lite and is the answer not in the manual?