•
"SDRAM Interface" on page
Defines the register values to configure the on-board SDRAM.
•
"Flash Memory" on page 1-15
Describes the on-board flash memory.
•
"CAN Interface" on page 1-15
Describes the on-board Controller Area Network (CAN) interface.
•
"Ethernet Interface" on page 1-16
Describes the on-board Fast Ethernet Media Access Controller
(MAC) interface.
•
"ELVIS Interface" on page 1-17
Describes the on-board National Instruments Educational Labora-
tory Virtual Instrumentation Suite (NI ELVIS) interface.
•
"Audio Interface" on page 1-17
Describes the on-board audio circuit.
•
"LEDs and Push Buttons" on page 1-18
Describes the board's general-purpose IO pins and buttons.
•
"Board Design Database" on page 1-19
Provides board design information.
•
"Example Programs" on page 1-19
Provides information about example programs included in the
ADSP-BF537 EZ-KIT Lite evaluation system.
For information on the graphical user interface, including the boot load-
ing, target options, and other facilities of the EZ-KIT Lite system, refer to
the online help.
For more detailed information about programming the ADSP-BF537
Blackfin processor, see the documents referred to as
Documents".
1-2
ADSP-BF537 EZ-KIT Lite Evaluation System Manual
1-13·
"Related