CGW-MB is an embedded and intelligent CLSS Gateway mainboard for connected
buildings. It enables system maintenance providers as well as end users to remotely
manage connected fire detection systems. The CLSS Gateway mainboard also supports
them to ensure compliance.
2.1 Operation
The CLSS Gateway mainboard acts as a portal among fire alarm panels, CLSS Site
Manager, and peripheral devices. The CLSS Gateway mainboard connection with the fire
alarm panel enables reading the inventory and transmitting the data. Connection with
the CLSS Site Manager facilitates remotely monitoring and managing the fire detection
systems.
2.2 Honeywell Connected Life Safety Services
The software suite enables remote management of fire detection systems. It monitors the
building's fire system events in real-time and notifies users about the events immediately.
It also supports periodic maintenance activities and helps in reports generation.
2.3 CLSS Gateway mainboard Board Layout
The illustration below points out those parts that are used for connections and trouble
shooting.
CGW-MB Installation and Users' Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022
Section 2: Overview
Figure 2.1: Printed Circuit Board: Layout
15