Honeywell CGW-MB Installation And User Manual page 175

NOTIFIER® UL
Network Media to next
Panel/node (Wire/Fiber)
HON-CGW-MBB
NUP
HON-CGW-MBB
High-Speed NCM
Open NUP Connec on
*If there are no available
NUP ports an addi onal
High-Speed NCM card
is required to add the gateway
to the network
24 VDC from panel
A dedicated power supply
3. Power Connection
NOTE: The external power supply must be dedicated and not shared with any other
devices.
NOTE: The panel's power supply to the CLSS Gateway mainboard must be within +24V DC
power.
On the CLSS Gateway mainboard Side
• Stand-alone Panel:
• Ensure that the NUP cable is connected with the NUP port of the CLSS Gateway
mainboard.
• Find the S7 switch next to the NUP port, and switch it towards NUP_IN.
CGW-MB Installation and Users' Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022
NUP NUP
HS-NCM
No er Onyx Panel Panel
OR
Network Media
NUP
(Wire/Fiber)
NUP
HS-NCM HS-NCM
No er Onyx Panel Panel
-ve
-
or
+ ve
+
Figure C.27: High-speed Network Panel: NUP Connection
Figure C.28: The S7 Switch
Required Equipment:
• NUP-to-NUP cable
• High-Speed NCM card
(if no available NUP port)
Red
Black
White
Green
Brown
Connecting to the Panels
174