Cgw-Mb Active Event Code - Honeywell CGW-MB Installation And User Manual

CGW-MB Active Event Code

0x0A
0x0B
7.29 CGW-MB Active Event Code
All events are mapped into Modbus event categories which are stored in the Modbus
register.
CGW-MB Installation and Users' Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022
Table 7.37: Exception Codes
Unit ID specified in the request packet is not configured
for monitoring.
FACP is off line or there is a communication problem on
the panel and/or NFN.
Table 7.38: Event Type Categories
Event
No Active Status (see note)
Mass Notification Alarm, High Priority
Fire Alarm
Security Alarm (Life)
Critical Process Alarm (Life)
Medical Emergency (Life)
CO Alarm
Mass Notification Alarm, Low Priority
Security Alarm (Property)
Critical Process (Property)
Mass Notification Supervisory, High Priority
Supervisory Signal (Guard's Tour)
Supervisory Signal (Equipment)
Mass Notification Supervisory, Low Priority
Disabled Alarm (AFP2800 Panel Only)
Disabled Active (AFP2800 Panel Only)
Non-Fire Activation
Non-Fire Activation (no acknowledgment
required)
CO Alarm & Fire Alarm
CO Supervisory
CO Supervisory & Photo Supervisory
CO Supervisory & Fire Alarm
CO Alarm & Photo Supervisory
Device Not Present
For Gamewell-FCI
General Alarm
Gas Alarm
CO Supervisory
Modbus Communications
CLSS Gateway
mainboard path
failed
CLSS Gateway
mainboard
target failed
Modbus
Register
Value
00H
05H
10H
11H
12H
13H
14H
15H
20H
21H
25H
30H
40H
45H
52H
55H
71H
72H
EAH
EBH
ECH
EDH
EEH
FFH
18H
22H
42H
73