Section 4: Installation; Mounting The Portable Clss Gateway Mainboard; 1: Connecting To A Fire Alarm Panel; 2: Connection Options - Honeywell CGW-MB Installation And User Manual

You can use a portable CLSS Gateway mainboard in the fire detection system.

4.1 Mounting the Portable CLSS Gateway Mainboard

Refer to your panel documentation to know about mounting the CLSS Gateway
mainboard onto the panel.
4.1.1 Connecting to a Fire Alarm Panel
To know about supported panel variants, their connection options, and commissioning
procedure, refer to the
4.1.2 Connection Options
The CLSS Gateway mainboard board can be connected with a cellular module, wireless
aerials, the CLSS Site Manager, a configuration computer, a panel, a mobile device, and
an external power supply.
Figure 4.1 illustrates the connection options at the top side of the CLSS Gateway
mainboard board.
Figure 4.2 illustrates the CLSS Gateway mainboard connection options at the bottom
side of the CLSS Gateway mainboard board.
RED COLOR
BLACK COLOR
BROWN COLOR
Figure 4.2: CLSS Gateway mainboard Connection Options - Bottom Side
CGW-MB Installation and Users' Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022

Section 4: Installation

"Connecting to the Panels" on page
Figure 4.1: CLSS Gateway mainboard Connections - Top Side
P1
P4
P7
GREEN COLOR
WHITE COLOR
P2
J5
135.
CLSS
Cloud
Mobile
Connection
Ethernet
Connection
Eth 1
( )
Modbus
Eth 0
( )
Client
Future Use
Configuration
Computer
Future Use
UART/TTL
/NUP
Fire Alarm Panel
23