Section 6: Post-Installation Activities; Upgrading The Clss Gateway Mainboard Firmware; 1: To Upgrade Before Commissioning The Clss Gateway Mainboard - Honeywell CGW-MB Installation And User Manual

The system maintenance provider is responsible for the maintenance and upkeep of the
CGW-MB. The maintenance involves avoiding potential issues, making regular backups,
restoring data when required, collecting data for troubleshooting, and other activities.

6.1 Upgrading the CLSS Gateway mainboard Firmware

CLSS Service Manager notifies the CLSS Gateway mainboard administrators when a new
firmware is launched. The administrators can perform the upgrade at a planned time.
CAUTION: BEFORE UPGRADING ENSURE TO GET PERMISSION FROM THE SITE. THE REBOOT AFTER THE
!
UPGRADE SHOULD BE AT A MUTUALLY PLANNED TIME WITHOUT AFFECTING THE OPERATION.
The upgrade happens in the background while the system is running. After the upgrade
the CLSS Gateway mainboard will reboot.
CAUTION: PREVENT ANY DISTURBANCE TO THE POWER CABLE OF THE CLSS GATEWAY MAINBOARD
!
DURING THE UPGRADE
6.1.1 To Upgrade Before Commissioning the CLSS Gateway mainboard
1. Connect the CLSS Gateway mainboard to Internet.
NOTE:
- The Internet connection can be either wireless or LAN.
- The LED indicator DL4 on the CLSS Gateway mainboard flashing Green confirms
Internet connection.
2. Log onto the CLSS Site Manager.
3. Click VIEW on the notification at the top.
Or
Click the SETTINGS icon at the bottom left.
4. Click CLSS Gateway mainboard Management in the Settings page.
5. Click Add CLSS Gateway mainboard on top.
CGW-MB Installation and Users' Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022

Section 6: Post-Installation Activities

32