C.10: Notifier® Ul; C.10.1: Connection Options; C.10.2: To Use A Nup Connection - Honeywell CGW-MB Installation And User Manual

NOTIFIER® UL
C.10 NOTIFIER® UL
C.10.1 Connection Options
The CLSS Gateway mainboard operates only with the NOTIFIER fire alarm control panels
as listed in the table below:
C.10.2 To Use a NUP Connection
Some NOTIFIER panel variants use a NUP connection with the CGW-MB.
1. On the CLSS Gateway mainboard Side
Connect the NUP cable to the NUP port of the CLSS Gateway mainboard board.
The NUP port is labeled as 6 in the
2. On the Panel Side
In the NUP socket of the panel:
• Stand-alone Panel: Connect the NUP cable.
HON-CGW-MBB
Fire Panel NUP
•
NUP-to-NUP cable (75577A)
CGW-MB Installation and Users' Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022
Table C.8: NOTIFIER UL Panel Connection Options
Fire Alarm Panel Models
ONYX Panels
NFS-320
NFS2-640
NFS2-3030
INSPIRE Panels
N16E
N16X
NUP
No
Connec on
J1
Red
Black
White
Green
Brown
Required Equipment:
Figure C.25: Stand-alone Panel: NUP Connection
RS-485 UART/TTL
No No
No No
No No
No No
No No
Figure C.25.
er Onyx Panel
Panel
Connecting to the Panels
NUP USB
Yes No
Yes No
Yes No
Yes No
Yes No
172