Table of Contents
Advertisement
Gamewell-FCI Panels
C.7 Gamewell-FCI Panels
C.7.1 Connection Options
Each variant of the Gamewell-FCI panel offers various connection options.
The CLSS Gateway mainboard operates only with the Gamewell-FCI fire alarm control
panels listed in the table below:
Fire Alarm Panel Models
E3 Series Panels
ILI-MB-E3
ILI-S-E3
ILI95-MB-E3
ILI95-S-E3
S3 Series Panels
SLP-E3
INI-7100
CAUTION: DO NOT INSTALL DACT-E3 AND THE CGW-MB TOGETHER ON AN ILI-MB-E3 CIRCUIT BOARD
!
OR AN ILI95-MB-E3 CIRCUIT BOARD. YOU CAN USE DACT-E3 ON A DIFFERENT NODE WITHIN THE
NETWORK.
Minimum Required Versions
Gamewell-E3: 7.00.106
Gamewell-S3: 7.00.106
CGW-MB: 3.1.4.72
LCD-SLP (Display Panel): 2.12.090
NGA-K: 7.00.100
Limitation(s)
Support for CAM-event alerts is currently not available for the CGW-MB. When the
support is available, the CGW-MB will send these messages to CLSS Site Manager (Cloud)
and the CLSS App.
C.7.2 To Use Panel's Printer Port Connection
Gamewell panels support data transfer through their RS-485 connection. The transferred
data is stored in the CLSS Site Manager.
1. On the CLSS Gateway mainboard Side
1. Connect the + (24 V) wire to the IN+ pin of an RS-485 port.
2. Connect the - (GND) wire to the IN- pin of an RS-485 port.
The RS-485 ports are labeled as 3 and 4 in the
2. On the Panel Side
•
E3 Series Panel
•
S3 Series Panel
•
E3 Series Panel
At the TB3 terminal of the panel,
• Connect the +ve wire to the TB3-1 pin.
• Connect the -ve wire to the TB3-2 pin.
At the TB6 terminal of the panel,
• Connect the GND wire to the TB6-1 pin.
• Connect the TxD wire to the TB6-2 pin.
• Connect the SUPV wire to the TB6-3 pin.
CGW-MB Installation and Users' Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022
Table C.5: Gamewell-FCI Panel Connection Options
RS-485
Yes
No
Yes
No
Yes
Yes
UART/TTL
RS-232
No
No
No
No
No
No
No
No
No
No
No
No
Figure
C.15.
Connecting to the Panels
USB
Ethernet
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Yes
Yes
No
159
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
