Overview; Rps-1000 Description - Honeywell SILENT KNIGHT Farenhyt Series Installation And Operation Manual

Overview

Section 1
Overview
1.1

RPS-1000 Description

The RPS-1000 Intelligent Power Module provides additional power and circuits to the
IFP-2000, IFP-1000, IFP-1000ECS, IFP-100 or IFP-100ECS FACPs. The RPS-1000
can power all IFP-2000, IFP-1000, IFP-1000ECS, IFP-100 or IFP-100ECS
compatible modules, including SLC devices (via a Model 5815XL SLC Expander),
remote annunciators (RA-1000); notification appliances, auxiliary power modules,
and all other compatible modules.
Note: The IFP-100 does not use 5815XL SLC expanders.
The RPS-1000 has six Flexputs™ and two programmable relays. Outputs are rated
3.0 A (6.0 A total for each RPS-1000). Relays are Form C rated at 2.5 A @ 24 VDC.
Outputs and relays are fully programmable.
The RPS-1000 is optically isolated, providing ground loop isolation and transient
protection. It functions as an SBUS repeater which conditions the RS-485 signal and
allows the module to drive up to 6,000 feet of additional SBUS wiring.
The RPS-1000 is housed in a metal cabinet that is identical in size to the IFP-1000/
IFP-1000ECS FACP cabinet. This cabinet is large enough to house two 17 AH
batteries. Like the IFP-1000/IFP-1000ECS cabinets, the RPS-1000 cabinet provides
mounting studs for two Model 5815XL SLC Expander modules.
The RPS-1000 communicates to the main IFP-1000 or IFP-1000ECS FACP via the
SBUS. Each RPS-1000 provides an additional 6,000 feet of SBUS wiring length to
the main panel. As the drawings on the next pages illustrate, this allows you to
distribute modules, SLC devices, and outputs throughout an extremely large facility.
As well as expanding the wiring length capabilities of IFP-1000 or IFP-1000ECS, the
RPS-1000 also expands IFP-1000's power capabilities by an additional 6.0 A of
current.
1-1
151153