Connecting Target System (As Occasion Demands) - Renesas M30800T-CPE User Manual

2.5 Connecting Target System (as occasion demands)

Connect the LCC probe (M30800T-PTC) on the lower board of the emulator to the LCC socket
(option) or the pitch converter board (option).
Figure 2.8 LCC probe on the lower board of the emulator
Some MCU packages need the pitch converter board (option) shown in Figure 2.9. When connecting
it, be sure to check the position of No. 1 pin.
Figure 2.9 Connecting target system
Notes on Connecting Target Systems:
Position of No. 1 pin
(The pin No. and "O" are
marked on the silk.)
0.65-mm-pitch
M30800T-PTC
(included)
LCC socket M3T-DIRECT100S M3T-DUMMY100S
100-pin LCC 100-pin QFP
(option) (option)
: Position of No. 1 pin
*1 : These three products are available in one package.
• Take care not to attach the converter board in a wrong direction. It may cause a fatal
damage to the emulator.
• Always shut OFF power of the emulator and the target system when connecting and
disconnecting the target system.
M30800T-CPU bottom connector
100-pin
M30800T-PTC
(included)
M3T-100LCC-DMS
(option)
*1
M3T-FLX-100NRB
100-pin QFP 100-pin QFP
(option) (option)
CAUTION
( 24 / 52 )
M30800T-PTC
0.5-mm-pitch
M30800T-PTC
(included)
M30800T-PTC
(included)
M3T-100LCC-DMS
(option)
M3T-100LCC-QSD M3T-FLX-100NSD
100-pin LQFP 100-pin LQFP
(option) (option)
144-pin 0.5-mm-pitch
M3T-FLX-144NSD
144-pin LQFP
(option)