Connecting The Target System - Renesas M3062PT-EPB User Manual

3.6 Connecting the Target System

Figure 3.11 shows how to connect this product according to your target system.
80-pin
0.65-mm-pitch
M3062PT-80FPB LCC socket
80-pin QFP 100-pin LCC
(not included) (included)
: No. 1 pin
*1: These three products are available in one package.
Figure 3.11 Connecting the target system according to target systems
Note on Connecting the Target System:
0.65-mm-pitch
M30800T-PTC
(included)
M3T-100LCC-DMS
M3T-FLX100-T
(not included)
M3T-DIRECT100S M3T-DUMMY100S
100-pin QFP 100-pin QFP
(not included) (not included)
• Take care not to attach a converter board in a wrong direction. It may cause a fatal
damage to the emulator and targets system.
Emulation probe
100-pin
(not included)
M3T-FLX100-R
(not included)
*1
M3T-FLX-100NRB M3T-F160-100NSD
100-pin QFP 100-pin LQFP
(not included) (not included)
CAUTION
( 34 / 80 )
0.5-mm-pitch
M30800T-PTC
(included)
M3T-100LCC-DMS
(not included)
M3T-FLX100-T M3T-FLX100-R
(not included) (not included)
M3T-100LCC-QSD M3T-FLX-100NSD
100-pin LQFP 100-pin LQFP
(not included) (not included)
128-pin
0.5-mm-pitch
M3T-F160-128NRD
128-pin LQFP
(not included)