Connecting The Target System (As Occasion Demands) - Renesas M306K9T2-CPE User Manual

2.5 Connecting the Target System (As Occasion Demands)

To connect the target system you need a pitch converter board (not included) shown in Figure 2.8.
Be sure to align the position of No. 1 pin to connect it.
Figure 2.8 Connecting to the target system
Notes on Connecting Target Systems:
• Take care not to attach the converter board in a wrong direction. It may cause a fatal
damage to the compact emulator.
• Always shut OFF the emulator and the target system when connecting and discon-
necting the target system.
( 23 / 56 )
M306K9T2-CPE
connector (bottom)
144-pin 0.4-mm-pitch
(for M306K9)
M3T-FLX-144NSE
144-pin TQFP
(not included)
CAUTION