Name Of Each Part; System Configuration - Renesas M30800T-CPE User Manual

Chapter 2. Usage

2.1 Name of Each Part

(1) System Configuration

Figure 2.1 shows the system configuration for this emulator.
Figure 2.1 System configuration
(1) Emulator M30800T-CPE (included)
(2) Serial interface cable (included)
(3) Power supply for emulator
* With some AC adapter, the power voltage may be changed significantly by the load. The
(4) Target system
(5) Power supply for the target system
(6) Host machine
Host machine (option)
This is a compact emulator for the M16C/80 Series of 16-bit MCUs which is operated only in the
single-chip mode with the real-time trace function (hereafter, emulator).
This is an interface cable for the host machine and the emulator.
This is a power supply for the emulator. Supply 5.0 V ±5% (DC).
Prepare the power supply separately. The power cable is included with this product.
switching power supply AC adapter or stabilized power supply are recommended.
This is your application system. This emulator can be used without the target system.
This is a power supply for the target system. As this emulator cannot supply the power to the target
system, supply the power to the target system separately from the emulator.
This is a personal computer for controlling the emulator.
Power supply for emulator (option)
Serial interface cable (RS-232C)
( 18 / 52 )
Power supply for target system (option)
Upper part: emulator
Lower part: target system