Table of Contents
Advertisement
7.
Wait until the message asked you to turn on the ignition switch.
8.
Re-enter the Fuel injection nozzle injection volume adjustment menu
to check whether the new value(s) are shown.
Figure 5-25 Sample of injector coding function (screen 4)
5.8.
GEARBOX MATCH
After changing the gearbox or changing the gearbox ECU, you need to use
the gearbox matching function to re-match the engine and the gearbox.
Before resetting the gearbox, please check the gearbox control unit to ensure
that there is no fault code. If there is a fault code, the gearbox memory function
cannot be reset. Please road test after reset.
The operation guidelines of the Gearbox Matching function are shown
below:
1.
Enter the Gearbox matching menu and choose relevant models
according to the vehicle being tested.
2.
Enter the Reset adaptive value menu.
3.
Turn on the ignition without starting the engine.
59
Advertisement
Table of Contents
Need help?
Do you have a question about the H6 Pro and is the answer not in the manual?