Table of Contents
Advertisement
ECU to the default state. Doing so can accurately control the actions of
regulating throttle (or idle engine) to adjust the amount of air intake.
The operation guidelines of the Throttle function are shown below:
1.
Enter the Throttle menu and choose relevant models according to the
vehicle being tested.
2.
Enter the Auto Recognition menu and turn on the ignition switch.
3.
Read carefully and complete the requisites listed before performing the
throttle regeneration function. And press OK after completing the
instructions shown.
4.
Wait until all the parameters are read and displayed.
Figure 5-20 Sample of throttle function (screen 1)
55
Advertisement
Table of Contents
