Table of Contents
Advertisement
and then press OK.
Wait until the message 'Write successfully' pops up.
5.
6.
Turn off the ignition switch.
7.
Wait until the message asked you to turn on the ignition switch.
8.
Re-enter the Fuel injection nozzle injection volume adjustment menu to check whether the new value(s)
are shown.
5.8.
GEARBOX MATCH
After changing the gearbox or changing the gearbox ECU, you need to use the gearbox matching function to
re-match the engine and the gearbox.
Before resetting the gearbox, please check the gearbox control unit to ensure that there is no fault code. If there
is a fault code, the gearbox memory function cannot be reset. Please road test after reset.
The operation guidelines of the Gearbox Matching function are shown below:
1.
Enter the Gearbox matching menu and choose relevant models according to the vehicle being tested.
2.
Enter the Reset adaptive value menu.
3.
Turn on the ignition without starting the engine.
Figure 5-24 Sample of injector coding function (screen 3)
Figure 5-25 Sample of injector coding function (screen 4)
45
Advertisement
Table of Contents
