Table of Contents
Advertisement
11. Wait for 2 minutes to let the particulate filter cool down.
12. Press drop out to exit the DPF function.
5.5.
BMS RESET
The Battery Management System (BMS) allows the scan tool to evaluate the
battery charge state, monitor the close-circuit current, register the battery
replacement, and activate the rest state of the vehicle.
This function enables you to perform a resetting operation on the monitoring
unit of the vehicle battery, in which the original low battery fault information
will be cleared and battery matching will be done.
Battery matching must be performed in the following cases:
The main battery is replaced. Battery matching must be performed to
⚫
clear original low battery information and prevent the related control
module from detecting false information. If the related control module
detects false information, it will invalidate some electric auxiliary
Figure 5-16 Sample of DPF function (screen 6)
52
Advertisement
Table of Contents
