Table of Contents
Advertisement
Figure 4-2 Sample of How to Connect Device to Vehicle via Wire
①Data Cable for USB 3.0 to Type B; ②V204 BOX; ③ Main Test Cable; ④ OBD2-16 Adapter
⚫ Please follow the steps below.
1. Turn on the tablet.
2. Connect the vehicle, the VCI box, and the tablet following the diagram below
(Figure 4-1 & Figure 4-2). Usually, the OBD port is located under the dashboard,
inside the driver's footwell.
3. Wait for the VCI box to communicate with the tablet, then click into the menus to
perform the functions.
If necessary, please connect the VCI box with the tablet using the USB 3.0 to type-B
cable, especially when working on some processes that need to transfer lots of data, like
reprogramming ECU.
Some older vehicles are not compatible with the OBDⅡ-16 adapter, please make sure
you're using the correct adapter. Some extra OBDⅠ connectors are attached to D9 Smart
Diagnostics System, please contact your dealer if you need other connectors.
22
Advertisement
Table of Contents
