Table of Contents
Advertisement
5.8 GEARBOX MATCH
After changing the gearbox or changing the gearbox ECU, you need to use
the gearbox matching function to re-match the engine and the gearbox.
Before resetting the gearbox, please check the gearbox control unit to
ensure that there is no fault code. If there is a fault code, the gearbox memory
function cannot be reset. Please road test after reset.
The operation guidelines of the Gearbox Matching function are shown
as below:
1.
Enter the Gearbox matching menu and choose relevant models
according to the vehicle being tested.
2.
Enter the Reset adaptive value menu.
3.
Turn on the ignition without starting the engine.
4.
Read the note and press OK to continue the Gearbox Matching function.
Figure 5-26 Sample of gearbox matching function (screen 1)
5.
Wait until the message 'Successful operation' popes up.
5.9 GEAR LEARNING
The crankshaft position sensor learns crankshaft tooth machining tolerance
and saves to the tablet to more accurately diagnose engine misfires. If gear
51
Advertisement
Table of Contents
