Table of Contents
Advertisement
1. If the brake pad wears the brake pad sense line, the brake pad sense line
will send a signal to the onboard tablet asking for replacing the brake
pad. After replacing the brake pad, you must reset the brake pad.
Otherwise, the car alarms.
2. Reset must be performed in the following cases:
The brake pad and brake pad wear sensor are replaced.
⚫
The brake pad indicator lamp is on.
⚫
The brake pad sensor circuit is short, which is recovered.
⚫
The servo motor is replaced.
⚫
The operation guidelines of the EPB function are shown below:
1.
Enter the EPB menu and choose relevant models according to the
vehicle being tested.
2.
Follow the instructions displayed and press YES after completing the
instructions shown.
Figure 5-4 Sample of EPB function (screen 1)
43
Advertisement
Table of Contents
