Related Manuals for Xtool IP608
Summary of Contents for Xtool IP608
- Page 1 User Manual IP608 Smart Diagnostic System Version 3.2 Revise date 2022/11 Shenzhen Xtooltech Intelligent Co., LTD...
-
Page 2: Cautions
Please read this user manual carefully before using the IP608 Smart Diagnostic System, referred to as the “Scan Tool” throughout this document. When reading the manual, please pay attention to the words “Note” or “Caution”, and read them carefully for appropriate operation. -
Page 3: Table Of Contents
ONTENT OPERATION INSTRUCTIONS ..........................I CAUTIONS! ................................I AFTERSALES-SERVICES ..........................I CONTENT ................................I GENERAL INTRODUCTION ........................4 GETTING STARTED ..........................4 Connecting Power................................4 Activation ..................................5 DIAGNOSTIC ............................7 Vehicle Connection ................................7 Beginning Diagnostic Testing ............................8 Vehicle Selection .................................... - Page 4 My Workshop Info ................................33 Firmware Information ..............................33 About ..................................... 34 REPORT ..............................34 Report .................................... 34 Replay .................................... 36 File Manager .................................. 36 UPDATE & FACTORY RESET ....................... 37 Update ................................... 37 Factory Reset ................................37 FAQ................................39 Q1: Failed to generate Diagnostic report ........................
- Page 5 Function Buttons ....................................43 Navigation Buttons ..................................... 43 Notification Bar ....................................44 Compliance Information ..............................45 FCC Compliance ....................................45 CE ..........................................45 UKCA ........................................45 Trademarks ..................................47 Copyright ..................................47...
-
Page 6: General Introduction
ENERAL NTRODUCTION The XTOOL IP608 smart diagnostic system (referred to as the “Scan Tool”) is an advanced scanning tool based on the Android operating system. It supports multiple languages and is suitable for different countries and regions. The advantage of this OBD-II (On-Board Diagnostics version 2) scanner is its comprehensive functions and its ability to quickly provide the user with more accurate diagnostic information. -
Page 7: Activation
Note: When connected to the OBD port, the device can be automatically charged via the car battery. The scan tool can standby for one day in sleep mode and up to 3 months when power off. It is recommended to switch off your Scan Tool after use! ACTIVATION After first-time users press and hold the power button to turn on the system, the system will automatically enter the guided... - Page 8 Click Start Activation to enter the activation page, as shown below: A pop-up window showing Activation Success indicates that you have completed the first boot setup, Click OK to enter the diagnostic system and start using the device.
-
Page 9: Diagnostic
3. D IAGNOSTIC The diagnostic application can read ECU information, read and clear DTC (Diagnostic Trouble Codes) and check live data and freeze frame data. The Diagnostic application can access the ECU of various vehicle control systems, including the Engine, Transmission, Anti-lock Braking System (ABS), Airbag Safety Restraing System (SRS), Electronic Parking Brake system (EPB) and perform many types of actuation tests. -
Page 10: Beginning Diagnostic Testing
Updates menu or consult the XTOOL technical service department; 5. Only wiring harnesses provided by XTOOL and designed for the scan tool are permitted to be used with this scan tool to avoid damage to the vehicle or the scan tool;... - Page 11 ECU information, and confirm whether the VIN can be read. ③ Contact the XTOOL technical team to provide the VIN code to confirm whether the model supports automatic identification of VIN. MANUAL ENTER: It supports manual input of car VIN code. When entering the VIN code manually, make sure that the 17 characters entered are correct to ensure accurate test results.
-
Page 12: Diagnosis Functions
Automatic Detection will automatically identify the vehicle's VIN code, and then read the information of your target diagnostic object. If you choose "Manual selection", then you can continue to select the vehicle brand, year, and model of the vehicle in the sub-menu to diagnose the vehicle. Enter "System Selection", you can also diagnose the vehicle according to the system according to your needs after selecting the model. - Page 13 ⚫ READ TROUBLE CODE In the process of diagnosis, if the device shows “System is OK” or “No Trouble Code”, it means there is no related trouble code stored in ECU or some troubles are not under the control of ECU. Most troubles are mechanical system troubles or executive circuit troubles.
- Page 14 Real-time information about various sensors is called “Live Data”. Live Data includes parameter identifications (PIDs) of the running engine such as oil pressure, temperature, engine speed, fuel oil temperature, coolant temperature, intake air temperature, etc. Based on these parameters, we can predict directly where the problem lies, which helps to narrow the scope of maintenance.
- Page 15 The scan tool includes support to select multiple PIDs and click Combine to combine different graphs into one chart. ⚫ Data recording The scan tool supports recording the current data values in the form of text. You can view the recorded files in Reports->Data Replay.
- Page 16 The live data items supported by vehicles of different brands are not the same, so the freeze frames displayed when diagnosing vehicles of different brands may also be different. Some vehicles may not have the option of a freeze-frame which means that the model does not support this function. Take Renault Duster ii ph as an example.
-
Page 17: Special Functions
These functions often eliminate the need to reset codes after resolving common problems. Since XTOOL is continuously developing, the manual may not include all of the latest special functions that are available for download. This user manual lists some of the commonly used special reset services for your reference. - Page 18 When ready, click "OK" to enter the bleed procedure, and pumping the brake pedal continuously with steady applies every 2 seconds during the entire procedure Continue pumping the brake pedal, when air bubbles are no longer visible, select OK to enter next bleed procedure for left front wheel...
- Page 19 Repeat the operation 3 times to complete the bleed procedure for the left front wheel, right front wheel and right rear wheel in turn. Stop pumping the brake pedal, and close the right rear bleeder screw Click OK to complete the entire bleed procedure...
-
Page 20: Oil Reset
Caution ⚫ The ABS pump screw needs to be unscrewed ⚫ Brake fluid will be under pressure during this process. Secure the bleed hose and open bleeder screws slowly ⚫ Some vehicles do not support automatic bleeding, but manually bleeding OIL RESET The scan tool can be used to reset the engine oil life system, which calculates the optimum oil life change interval based on the vehicle’s driving conditions and climate. - Page 21 Confirm the [New Value] you just entered, and then click OK at the bottom right to complete the procedure. Message of ‘Write successfully’ displays when Oil Reset function has successfully performed.
-
Page 22: Epb
Electronic Parking Brake (EPB) System reset is a popular special function. You can use this function to reset the electronic parking brake system and brake pads (retraction, release of the brake pump), G-sensor and body angle calibration. This function has multiple uses and can safely and effectively maintain the electronic brake system. These applications include deactivating and activating brake control systems, assisting in controlling brake fluid, applying and releasing brake pads, setting brakes after replacing brake discs or brake pads, etc. -
Page 23: Throttle
Wait until the message of ‘Successful operation’ popes up. And press OK to exit the menu. Enter the Exit maintenance mode menu and wait until the message of ‘‘Successful operation’ popes up. THROTTLE Throttle Position Sensor (TPS) Match, this function enables you to make initial settings to throttle actuators and returns the “learned”... - Page 24 ahead position before calibration. In addition, the VIN is also read from the instrument cluster and stored permanently in the SAS EEPROM. On successful completion of calibration, the SAS fault codes will be automatically cleared. To reset the steering angle, you need to first find the relative zero point position for the car to drive in a straight line. Taking this position as a reference, the ECU can calculate the accurate angle for left and right steering.
-
Page 25: Bms Reset
Wait until the following instruction is displayed and press OK after completing the instructions shown. Message of ‘Function execution is completed’ displayed when SAS reset function has successfully completed. BMS RESET The Battery Management System (BMS) allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement and activate the rest state of the vehicle. -
Page 26: Injector Coding
Enter the battery manufacturer and press OK after the input. Enter the 10-digit battery serial number and press OK after the input. INJECTOR CODING This function can write the identification code of the fuel injector into the ECU so that the ECU can recognize the new injector. After the ECU or injector is replaced, the injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection. - Page 27 In general cases, there is no need to perform the coding matching function after cleaning; The identification of the fuel injector includes its working accuracy value and type value. When replacing an injector you need to find the corresponding model for replacement; ...
-
Page 28: Dpf Regeneration
Wait until the message ‘Write successfully’ pops up. Turn off the ignition switch. Wait until the message asks you to turn on the ignition switch. Re-enter the Fuel injection nozzle injection volume adjustment menu to check whether the new value(s) are shown. DPF REGENERATION The Diesel Particle Filter (DPF) function manages DPF regeneration, DPF component replacement teach-in, and DPF teach- in after replacing the ECM. - Page 29 ⚫ The catalytic oxidizer is removed or replaced. ⚫ The DPF regeneration MIL is on and maintenance is performed. ⚫ The DPF regeneration control module is replaced. The operation guidelines of the DPF function are shown as below: Enter the DPF menu and choose relevant models according to the vehicle being tested. Enter the DPF regeneration menu.
- Page 30 Follow the instructions displayed and press OK after completing the instructions shown. IMPORTANT: Please pay attention to the Note. Press the OK button to start the regeneration. 10. Wait for the value of carbon deposit to decrease until a message of ‘Emergency regeneration has been completed’ pops up, this process may take up to 40 minutes.
-
Page 31: Tpms Reset
11. Wait for 2 minutes to let the particulate filter cool down. 12. Press drop out to exit the DPF function. TPMS RESET This function allows to perform the learning and matching and resetting functions of the tire pressure sensor. TPMS Reset may be performed in the following cases: ⚫... - Page 32 And then please enter the sub-menu by the origin region of car make and select the vehicle model you need TPMS reset can be further divided into 4 methods, such as Automatic Relearn, Static Relearn, Copy ID and OBD Relearn, which is depending on the specific model.
- Page 33 ! Note: The remaining sensor learning needs to be completed within 3 minutes, otherwise please repeat the relearn procedure from step 4! Turn the vehicle off and power off. Adjust all sensors to the standard value. Tire pressure warning light will disappear after success. If procedure fails, please repeat steps 4-7 ⚫...
-
Page 34: Settings
➢ Step1: Contact your dealer or XTOOL Support and leave a message about the language you need and the S/N of your device. A technician will modify the language configuration for you in the background. Wait for a response from the technician indicating Step 1 is complete. -
Page 35: My Workshop Info
MY WORKSHOP INFO Click on My Workshop Information, you can input your workshop information here. As shown in the figure below, you need to fill in the valid information in the corresponding column and click "SUBMIT". Then it will show your workshop information in the report when you generate a diagnostic report, including your company name, address, website, telephone, and mailbox. -
Page 36: About
You can view the firmware information here, including the firmware name, the latest firmware version and the currently used firmware version. Diagnostic tablet supports automatic firmware update, please make sure that the device is connected to the network when you enter the diagnostic software and the firmware will be automatically updated to the latest version. ABOUT Tap on ABOUT, you can check the serial number and APP version on here. - Page 37 When you finish the diagnostics progress and exit the diagnostic application specific to this vehicle, you will get a prompt of report regeneration. When you open the report, located in the header of the table is the workshop information you filled in advance in the system setup, then the information of the vehicle, as shown below: Note: The vehicle information is allowed to edit by clicking the pen icon on the right side of the picture shown above.
-
Page 38: Replay
Step 1: Install an APP that can connect to your target printer. Add the printer and input the IP address of the printer in the APP, or you can contact the XTOOL support team (support1@xtooltech/ support2@xtooltech.com) for help. The Scan tool doesn’t provide the printer driver software, please install a third part App on the tablet if you need the print your Diagnostic report. -
Page 39: Update & Factory Reset
When the subscription expires, the software has installed on your device itself still is available, but all updates will be invalid. If you delete specific software due to the personal operation, XTOOL is not responsible for supporting the restoration of the software when the subscription expires. - Page 40 After selecting the system language, click Next to enter the Wi-Fi connection page, as shown below: Select a network to connect to on the Wi-Fi connection page. You will need to enter the Wi-Fi password to establish Wi-Fi connectivity. After successfully connecting to an Internet network connection, the scan tool will jump to Factory mode to download the software: This download process can take several minutes, largely determined by the speed of your Internet connection.
-
Page 41: Faq
Q2: HOW TO PRINT A DIAGNOSTIC REPORT The XTOOL device is compatible with third-party print drivers. You can download the printer driver you need in the browser that comes with the tablet to install it, and then set your printer in the OS settings. After the configuration is completed, you can print Reports. -
Page 42: Q5: How To Make An Appointment For Remote Support
The tablet has to connect to the network every 30 days, otherwise, the Diagnostic app will be locked and disabled until the device is connected to the network. After connecting to the network, the APP will be available again. If the device is still unavailable, please contact XTOOL technical support team for help. -
Page 43: Q12: Can't Receive The Email After Sharing The Diagnostic Report
4. Provide your ID to the partner or XTOOL technician, and then wait for them to send you a remote-control request. 5. A pop-up window will be displayed, asking you to permit the remote-control program to control your device. -
Page 44: Warranty & Services
ARRANTY ERVICES Shenzhen XTOOLtech Intelligent Co., LTD.(the Company) warrants to the original retail purchaser of this XTOOL device that should this product or any part thereof during normal usage and under normal conditions be proven defective in material or workmanship that results in product failure within ONE YEAR from the date of purchase, such defect(s) will be repaired, or replaced (with new or rebuilt parts) with Proof of Purchase, at the Company’s option, without charge for parts or labor... -
Page 45: Button Description
diagnostic tool and the internal fault of the car must be eliminated manually It is a fault that has occurred in the past and can be Passive/sporadic cleared by Scantool, and user should to check if the DTC will appear again. BUTTON DESCRIPTION FUNCTION BUTTONS The following table briefly describes each function button... -
Page 46: Notification Bar
Showing the Bluetooth states Diagnostic Application: Click this button to display the diagnostic vehicle interface Press for screen recording NOTIFICATION BAR Slide down to open the notification bar. Then tap the Notification bar that newly appeared. Users can adjust the brightness of the screen when they need it, and you can also connect to Wi-Fi and enable Airplane mode. -
Page 47: Compliance Information
COMPLIANCE INFORMATION FCC COMPLIANCE FCC ID: 2AW3IF500 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. - Page 48 SHENZHEN XTOOLTECH INTELLIGENT CO., LTD COMPANY ADDRESS: 17&18/F, BUILDING A2, CREATIVITY CITY, LIUXIAN AVENUE, NANSHAN DISTRICT, SHENZHEN, CHINA FACTORY ADDRESS: 2/F, BUILDING 12, TANGTOU THIRD INDUSTRIAL ZONE, SHIYAN STREET, BAOAN DISTRICT, SHENZHEN, CHINA SERVICE-HOTLINE: 0086-755-21670995/86267858 EMAIL: MARKETING@XTOOLTECH.COM FAX: 0755-83461644 WEBSITE: WWW.XTOOLTECH.COM...
-
Page 49: Trademarks
This manual is designed for the usage of the IP608 Smart Diagnostic System and provides operating instructions and product descriptions for users of this scan tool. Use the device only as described in this manual. XTOOL is not responsible for any consequences of violating the laws and regulations caused by using the product or its data information.