Table of Contents
Advertisement
5.7 Block Erase
(1) Choose [Block Erase(L)] from [Device(D)] menu to display "Block Erase" dialog.
Figure 5.7.1 Block Erase
(2) In "Block Erase" dialog, all blocks of currently selected MCU are displayed. Click [Select All] to
select all blocks.
Click [Clear] button to clear all selected blocks.
Select the blocks you wish to erase and click [OK] to close "Block Erase" dialog. Subsequently, the
dialog that shows execution process appears and the selected blocks are erased. After completing
erasing, the dialog is closed and "Block Erase ...finish" dialog is displayed. Click [Cancel] to close
"Block Erase" dialog.
Figure 5.7.2 Block Erase Dialog
REJ10B0239-0140/Rev.1.40
UART Flash Memory Programming Utility
Mar. 2007
M3S-UFLA32R
Page 15 of 30
Advertisement
Table of Contents
