Renesas M3S-UFLA32R User Manual page 13

4) Reset the Target MCU
Reset the target MCU by pressing the reset switch on the target board.
5) Starting the M3S-UFLA32R
Start the M3S-UFLA32R.
6) Execution of Writing to the Flash Memory by the M3S-UFLA32R
Operate the M3S-UFLA32R and perform writing to the flash memory.
For detail about operation method, refer to "5. Function Description of the M3S-UFLA32R."
Note: During erasing or writing, it is prohibited to reset the target board and to turn off the power.
7) Exit the M3S-UFLA32R
Exit the M3S-UFLA32R.
8) Power off the Target Board
Cut the power supply to the target board.
REJ10B0239-0140/Rev.1.40
UART Flash Memory Programming Utility
Mar. 2007
M3S-UFLA32R
Page 7 of 30