Table of Contents
Advertisement
5.6 Erase
(1) Choose [Erase(E)] from [Device(D)] menu or click [Erase] button to display the dialog that shows
execution process, and then erase the flash memory. After completing the flash memory erasing,
the dialog is closed and "Erase ...finish" dialog is displayed.
Figure 5.6.1 Erase
(2) Click [OK] in the "Erase...finish" dialog to close the dialog.
Figure 5.6.2 Erase Finish Dialog
REJ10B0239-0140/Rev.1.40
UART Flash Memory Programming Utility
Mar. 2007
M3S-UFLA32R
Page 14 of 30
Advertisement
Table of Contents
