ABB ACS2000 User Manual page 88

88 A C S 2 0 0 0 , 4 K V U S E R M A N U A L
3. To enter the actual signal selection function,
press the ENTER key.
4. To select a parameter group, press the
corresponding fast navigation key.
5. To select an actual signal, press the
corresponding slow navigation key.
6. To accept the selection and to return to the
actual signal display mode, press the ENTER key.
1 L -> 600.0 rpm
1 ACTUAL SIGNALS
01 DC VOLTAGE
1000 V
1 L -> 600.0 rpm
1 ACTUAL SIGNALS
01 DC VOLTAGE
1000 V
1 L -> 600.0 rpm
2 ACTUAL SIGNALS
05 NP VOLTAGE
1000 V
1 L -> 600.0 rpm
StateINU ReadyOn
MOTOR SP 0.00 rpm
POWER 0.0 kW
7. To cancel the selection and keep the original
selection, press any of the mode keys. The
selected CDP control panel mode is entered.
1 L ->
StateINU
MOTOR SP
POWER
Displaying a fault and resetting the fault history
1. To enter the actual signal display mode, press the
ACT key.
1 L ->
StateINU
MOTOR SP
POWER
2. To enter the fault history display, press either of
the fast navigation keys.
1 L ->
1 LAST FAULT
+ PANEL LOST
0707730 12:30:02.3256
3. To select the previous or next fault, press the
corresponding slow navigation key. The up key
selects the previous, the down key the next fault.
1 L ->
2 LAST FAULT
+ AMC: Fault class 1
9H 38 MIN 48 S
600.0 rpm
ReadyOn
0.00 rpm
0.0 kW
600.0 rpm
ReadyOn
0.00 rpm
0.0 kW
600.0 rpm
600.0 rpm