ABB ACS2000 User Manual page 40

40 A C S 2 0 0 0 , 4 K V U S E R M A N U A L
—
Control system configuration and main
42
components
Simplified illustration
of control system
This section provides a brief functional overview of
the main hardware components of the control
system and their interconnection.
Control compartment
PPCS
Phase module
AFE
ACS2000
The control system is configured, customized and
tuned with a set of application parameters. The
application parameters are organized in functional
groups and have factory-set default values.
The default parameter values are adjusted during
commissioning to the specific application of the
drive to activate the specific control, monitoring
and protection functions for the driven process,
and to define the signals and data to be transferred
between drive and external equipment.
AFE
AMC circuit board
AFE
INT circuit board
PPCS
Phase Phase
INT board INT board
Phase module
Higher-level control system
CDP control panel
Fieldbus
adapter
PPCS
PPCS PPCS
Phase Phase
INT board INT board
Phase module Phase module
INU
The parameters and parameter groups referred to
in the signal allocation tables in this chapter are
valid for drives with software version LDAI60xx
revision "-" and later versions.
See Appendix M - Signal and parameter
table, located on the CD, for detailed
information on the parameters provided for
signal allocation, signal type selection,
signal inversion, scaling and filtering, etc.
DriveWare ® DriveWare ®
External
devices
IOEC
I/O devices
INU
AMC circuit board
Option
Pulse
encoder
INU
INT circuit board
PPCS PPCS
Phase Phase
INT board INT board
Phase module Phase module