Table of Contents
Advertisement
Testing Performance
To test the threshold accuracy (logic analyzer)
Set up the logic analyzer
1 Press the Config key.
2 Unassign Pods 3 and 4, Pods 5 and 6, and Pods 7 and 8. To unassign the pods, select
the pod field. In the pop-up menu, select Unassigned.
Analyzer I
flome'
(I1ACHWE I
I
Type' (
Timing
)
Anol~zer
2
UnOSSJgnea Pods
:~'=~==============~=I
:~:================
=J
(07
__.
' L I
All-
p_
Connect the logic analyzer
1 Using the 17-by-2 test connector, BNC cable, and probe tip assembly, connect the
data and clock channels of pod 1 to one side of the BNC Tee.
2 Using a BNC·banana cable, connect the voltmeter to the other side of the BNC Tee.
3 Connect the BNC Tee to the Main Signal output of the function generator.
MI\IN
SIGNAL
®
3-10
Advertisement
Table of Contents
