Connect The Logic Analyzer - HP 1660E Series Service Manual

Testing Performance
To testthe single-clock, multiple-edge, state acquisition (logic analyzer)
Connect the logic analyzer
1 Using the 6-by-2 test connectors, connect the first combination of logic analyzer
clock and data channels listed in one of the following tables to the pulse generator.
IfyOli are testing an HP I 660E or HP 166IE, you will repeat this test for the second
combination.
2 Using the SMA cables, connect channell, channel 2, and trigger from the
oscilloscope to the pulse generator.
Connect the HP 1660EjES/EP or HP 1661 EjES/EP logic Analyzer to the Pulse Generator
Testing
Combinations
2
Connect to
HP 8133A
ChannelZ Output
Pod 1, channel 3
Pod 3, channel 3
Pod 5, channel 3
Pod 7, channel 3
Pod 1, channel 11
Pod 3, channel 11
Pod 5, channel 11
Pod 7, channel 11
Connect to
HP 8133A Channel
ZOutput
Pod 2, channel 3
Pod 4, channel 3
Pod 6, channel 3
Pod 8, channel 3
Pod 2, channel 11
Pod 4, channel 11
Pod 6, channel 11
Pod 8, channel 11
Connect to
HP 8133A Channel
1 OUlpnt
J-clock
J-clock
3-52
· - C I
I~I
f>j!!-KJJfui:~ J
(9J~