Table of Contents
Advertisement
M3028BT2-CPE User's Manual
Notes on Applicable MCUs:
This product is applicable to the M16C/Tiny Series MCUs. ROM, RAM size and peripheral functions vary
depending on the target MCUs used. Before the program development, refer to each Hardware Manual of the
M16C/Tiny Series. When developing the program of the M16C/26A and 28 Groups, do not access to the SFR
which is not built in the M16C/26A and 28 Groups.
With this product, the initial value of main clock stop bit (CM05) is different from that of the M16C/26A Group
M16C/26T MCU. Note that the initial value of CM05 of this product is set to "0", and that of the M16C/26A
Group M16C/26T MCU is set to "1".
Note on Final Evaluation:
Be sure to evaluate your system with an evaluation MCU. Before starting mask production, evaluate your
system and make final confirmation with a CS (Commercial Sample) version MCU.
REJ10J1457-0300 Rev.3.00 July 22, 2009
IMPORTANT
4. Hardware Specifications
Page 72 of 90
Advertisement
Table of Contents
