M3028BT2-CPE User's Manual
3.4 Checking Connections of the Emulator System
Check to see that the emulator debugger has been connected correctly to the emulator.
REJ10J1457-0300 Rev.3.00 July 22, 2009
3. Usage (How to Use the Emulator Debugger)
Checking connections of the emulator
system
When the emulator debugger is connected correctly to the
emulator after you have finished setting up the Init dialog
box and the MCU Setting dialog box, you will see a
message "Connected" displayed on the "Debug" tab of the
Output window.
Page 50 of 90