M3028BT2-CPE User's Manual
3. Using or not using the CPU rewrite mode
4. Using or not using the trace point function
REJ10J1457-0300 Rev.3.00 July 22, 2009
3. Usage (How to Use the Emulator Debugger)
Using or not using CPU rewrite mode
Specify whether or not to debug in CPU rewrite mode. To
debug the user system that uses CPU rewrite mode, check
this box. This option can be selected or deselected only
when you are starting up the emulator debugger.
Notes:
When debugging in CPU rewrite mode is enabled, the
following functions cannot be used:
- Software breakpoint setting in the internal ROM area
- Execution of COME in the internal ROM area
Using or not using the trace point function
The emulator has two-point events, which are shared by the
trace function and the hardware break function. Specify
whether or not to use the trace point function.
- When not using the trace point function (default),
deselect the check box. In this case, the events are used
for the hardware break function.
- To use the trace point function, check this box.
In this case, the events are used for the trace point
function. The hardware break function is disabled.
Page 45 of 90