M3028BT2-CPE User's Manual
(3) Errors Occur at Debugger Startup
Table 5.3 Checkpoints of errors at debugger startup
Error
Target MCU is uncontrollable.
REJ10J1457-0300 Rev.3.00 July 22, 2009
(1) Check that the NQPACK etc. mounted on the user system is soldered
properly.
(2) Check that the connector is installed properly to the user system.
(3) Check that pin CNVSS is held Low.
Checkpoint
5. Troubleshooting
Page 85 of 90