Table of Contents
Advertisement
M3028BT2-CPE User's Manual
(3) When DATA ACCESS is selected
1. Window for setting the address
2. Window for setting data
REJ10J1457-0300 Rev.3.00 July 22, 2009
3. Usage (How to Use the Emulator Debugger)
Setting the address
You can set eight conditions, e.g., a specified address, a
specified address range, etc.
Setting data
You can set two conditions, e.g., specified data or not to
compare data.
Setting the access condition
You can set three conditions, e.g., read, write, and
read/write. When you have finished setting the data and
access condition, click OK.
Page 58 of 90
Advertisement
Table of Contents
