Setting In The Head Module - Mitsubishi Electric MELSEC-Q Series User Manual

11.2.3 Setting in the head module

Connect GX Works2 to the head module and set parameters.
Master station (Station No.0)
1) Create a project.
Select "LCPU" in "Series" and "LJ72GF15-T2" in "Module".
[Project] [New]
2) Open the PLC parameter window and set parameters as follows.
Project window
Setting"
Setting
[Parameter] [PLC Parameter]
11 - 7
Chapter 11 PROGRAMMING
Intelligent device station (Station No.17)
"Communication Head