Mitsubishi Electric MELSEC-Q Series User Manual page 67

Item
Set parameters of slave stations (the number of
points and assignment of link devices) in the master
station.
When the checkbox next to "Set the network
[Network Configuration
configuration setting in the CC IE Field configuration
Settings] button
window" is checked, the button will be changed to [CC
IE Field Configuration Setting]. In this manual, the
operation with the checkbox checked is described for
explanation purpose.
[Network Operation Set the operating status of a network if a data link
Settings] button error occurs or the CPU module is set to STOP.
Set link refresh ranges between the link devices of the
[Refresh Parameters]
Simple Motion module and the devices of the CPU
button
module.
[Interrupt Settings] Set conditions for sending an interrupt request to the
button CPU module.
(2) Setting example
Description
For setting examples, refer to Chapter 11.
Chapter 7 PARAMETER SETTING
Setting range
Refer to Section 7.4.
Refer to Section 7.5.
Refer to Section 7.6.
Refer to Section 7.7.
7 - 7
Remark
–
–
–
–