Mitsubishi Electric MELSEC-Q Series User Manual page 78

Item
Set this item to reserve the slave station from the
station No.17 to 120. (Refer to Section 8.5.)
• No Setting
• Reserved Station
Reserved/Error Invalid
Station
• Error Invalid Station
Alias
These items cannot be set for the Simple Motion
module.
Comment
Set "Link Scan Mode Setting", "Loopback Function
Setting", "Block Data Assurance per Station", and
"Operation Setting for Returning".
(1) Link Scan Mode Setting
[Supplementary Setting]
button
(2) Loopback Function Setting
(3) Block Data Assurance per Station
(4) Operation Setting for Returning
(Note-1): The range from the station No.1 to 4 is valid in the 4-axis module, and the range from the station No.1 to 8 is valid in the 8-axis
module.
Description
The slave station is connected to the network.
The slave station is reserved for future expansion.
By reserving a slave station, link device assignment
will not change even if the slave station is added or
the reservation is cancelled. Therefore, the program
needs not to be modified. Physical connection of the
slave station is not required.
This item cannot be set for the Simple Motion
module.
This item cannot be set for the Simple Motion
module.
This item cannot be set for the Simple Motion
module.
Select whether to assure data integrity on a station
basis in link refresh between the CPU module and
the Simple Motion module. (Refer to Section
8.3.4.)
This item cannot be set for the Simple Motion
module.
Chapter 7 PARAMETER SETTING
Setting range
• No Setting
• Reserved Station
(Default: Blank)
All invalid.
• Link Scan Mode Setting:
All invalid.
• Loopback Function Setting:
All invalid.
• Block Data Assurance per Station:
Selected (Assure Block Data)/not
selected
(Default: Selected)
• Operation Setting for Returning
All invalid.
7 - 18
Remark
•If the error invalid
station is set,
"Parameter error
(error code:
D301H)" will
occur.
•All invalid for the
station No.1 to
(Note-1)
16
.
–
•"Block Data
Assurance per
Station" is a
function for the
station No.17 to
120.