Mitsubishi Electric MELSEC-Q Series User Manual page 167

Sequence scan
Start contact
Completion device
Own station CPU
(Device specified in (D2))
Completion status indication
device (Device of (D2)+1)
Write data storage device
(Device specified in (S2))
Completion status
(Device of (S1)+1)
Simple Motion module
(3) Error
When the dedicated instruction fails, error details can be checked by any of the
following methods:
(a)
(b)
• When failed
WRITE
0 END
3000
Target station error
In GX Works2
Error details can be checked using CC-Link IE Field Network diagnostics. (Refer
to Chapter 9.)
By devices
Completion status indication device ((D2)+1) is turned on and an error code is
stored in Completion status ((S1)+1) of the control data.
According to the error code, check the error details and take a corrective action.
(Refer to Section 12.5.)
Chapter 10 DEDICATED INSTRUCTIONS
0 END
Channel 1
10 - 29
0 END 0 END
1 scan
Error code
0 END