Specifications - Wavetek 3000 Instruction Manual

GENERAL INFORMATION
1 .2 SPECIFICATIONS
1 .2 .1 Frequency
RANGE
READOUT
RESOLUTION
ACCURACY
STABILITY
1 .2 .2 RF Output Level
POWER LEVEL RANGE
LEVEL CONTROL
TOTAL LEVEL ACCURACY
ACCURACY BREAKDOWN
1 .2 .3 Output Characteristics
IMPEDANCE
SWR
1 .2 .4 Spectral Purity
HARMONIC OUTPUT
SUB-HARMONICS
1 MHz to 520 MHz selectable in 1 kHz steps .
6 digit lever/indicator switches
1 kHz
CW and AM modes
±0 .001% after 15 min .
(Typ ±0 .0002% after 2 hours within
3 months of calibration)
FMx1 mode
±(0 .001% +10 kHz)
FMx100 mode
±(0 .001% +45 kHz)
CW and AM modes <0 .2 ppm/hr .
FMx1 mode
500 Hz/10 min .
+13 dBm to -137 dBm (1 V to .03 vV)
Continuously adjustable in 10 dB steps and
with an 11 dB vernier . Output level is in-
dicated on a front panel meter calibrated
in volts and dBm .
+13 to -7 dBm :
±1 .25 dB (Typ ±0 .75 dB)
-7 to -77 dBm :
±1 .95 dB (Typ ±1 .25 dB)
<-77 dBm
±2 .75 dB (Typ ±1 .5 dB)
Flatness (+13 to -7 dBm) : ±0 .75 dB
(Typ ±0 .5 dB)
Output Meter : ±0 .5 dB
Step Attenuator : ±0 .5 dB to 70 dB
(±0 .2 dB calibration error)
±1 .0 dB to 130 dB
(±0 .5 dB calibration error)
50 ohms
<1 .2 at RF output levels below 0 .1 V
>30 dB below fundamental from 10 to 520 MHz
>26 dB below fundamental
from 1 to 10 MHz
None detectable