Description Of Rear Panel - Wavetek 3000 Instruction Manual

OPERATION
(D
Ext continued
Mode Switch
RF out
Power Switch
2 .5 DESCRIPTION OF REAR PANEL
Switch 115/230 V
AC Line Fuse
WARNING
TO PREVENT ELECTRIC SHOCK, DO NOT
REMOVE COVERS. NO USER SERVICEABLE
PART INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL
WARNING :
FOR CONTINUED PROTECTION AGAINST
FIRE HAZARD REPLACE ONLY WITH THE
SAME TYPE AND RATING OF FUSE
Figure 2-3 .
full scale calibration of 500 Hz peak devia-
tion in FMxl, a 50 kHz peak deviation
in
FMx100 or 10% amplitude modulation in AM .
Selects CW,
AM, FMxl or FMx100 operation .
Type N connector
provides a connection for
the RF output signal .
Provides AC power to the power supply .
Rear Panel
Selects either 115 volt AC or 230 volt
AC
supply mains . Before operating the instru-
ment checkthat the fuse mounted in the Rear
Panel Fuse Holder correspondsto the correct
value for the selected voltage .
1 .0 amp for
115 volt AC or 0 .5 amp for 230
volt AC .
O
Input 50/60 Hz
3 prong AC plug provides
connection to AC
mains .